Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Los Feliz, CA
Gate access control in Los Feliz usually means retrofitting a 1920s or 1930s wrought iron swing gate with modern electronics, and the work costs more here than in flatland LA because the hillside grades and original stucco pilasters fight every installation. Most Los Feliz calls we take start with a gate that either won’t open on command, opens for the wrong people, or has a keypad that stopped talking to the operator. Call (424) 321-7416 and we’ll give you a written price before any work starts.
Why Los Feliz Homes Are Different
Los Feliz is dense with pre-WWII Spanish Colonial Revival and Mediterranean Revival estates, particularly in the Los Feliz Hills above Griffith Boulevard and in enclaves like Laughlin Park. Those homes came with ornamental wrought iron swing gates set into original stucco pilasters. Seventy to a hundred years later, the pilasters are often out of plumb or crumbling at the hinge points, so a gate that sags or won’t latch usually needs column work before any electronic fix will hold. The driveway grades in the hills, especially off streets like Glendower Avenue and Bonvue Avenue, routinely exceed 15 percent. A standard residential opener that works fine on a flat street in Los Angeles burns out within a year on those slopes because the gate is fighting gravitational torque on every cycle. That’s why we spec commercial-duty hardware on hillside Los Feliz properties from the first visit, not the third. The north-facing lots that back up to Griffith Park’s eucalyptus and oak canopy also drop constant debris into slide tracks and across photo-eye paths, so we build that reality into every service call here.
Our Main Los Feliz Services
These are the three services Los Feliz homeowners call us about most, plus the two we cover in depth below.
Gate Repair in Los Feliz
Most repair calls in Los Feliz involve a sagging or seized wrought iron gate, a hinge pulled loose from a stucco pilaster, or an operator that’s been overworked by a steep driveway. We diagnose the full assembly, not just the visible symptom, and the written quote you get before we start covers the parts and labor in one flat number. Gate Repair in Los Feliz is the page that lays out what a typical repair involves, what it costs, and what we photograph on the way out.
Gate Installation in Los Feliz
New gate installations in Los Feliz usually mean matching a period home with a custom steel or wrought iron gate that respects the original architecture, while engineering the hinges and operator for a hillside grade. We measure, quote in writing, and schedule the work rather than promising same-day turnarounds on custom fabrication. Gate Installation in Los Feliz covers sizing, materials, and what a full install includes.
Gate Motor & Opener in Los Feliz
Motor and opener work here is dominated by the grade problem: hillside Los Feliz gates need commercial-rated operators, proper limit-switch travel settings, and enough torque headroom to survive Santa Ana wind events without burning out. We service nine major automation brands and never steer you toward a replacement when the existing motor is repairable. Gate Motor & Opener in Los Feliz breaks down the brands, the common failures, and the pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Los Feliz
Gate access control in Los Feliz means adding or repairing the layer that decides who gets in: keypads, remotes, phone entry, card readers, or video intercoms. The older homes here were never wired for any of it, so most jobs involve running new low-voltage line through original masonry walls, which is slower and more expensive than the same work on a stucco-over-wood-frame wall in a newer neighborhood. Dense eucalyptus debris and the occasional Santa Ana wind also mean photo-eyes and keypad housings need to be checked more often here. See Gate Access Control for the full scope of what we install and repair.
Keypad Entry
Signs you need it
The keypad lights up but the gate won’t move, the code works only sometimes, or the housing is cracked and letting water in.
What it costs in Los Feliz
Keypad entry replacement in Los Feliz typically runs $290 to $710, depending on whether we’re swapping the unit or re-running the wire through a masonry pilaster.
How we do it
We test the circuit, replace or re-terminate the keypad, program the codes, and photograph the final wiring and settings.
Remote Control
Signs you need it
The remote only works inches from the operator, one remote stopped pairing, or the gate opens on its own when a neighbor’s remote is pressed.
What it costs in Los Feliz
Remote control programming or replacement in Los Feliz runs $85 to $340, depending on the receiver type and whether we’re syncing one transmitter or replacing the receiver board.
How we do it
We match the receiver frequency, pair the remotes, clear old codes that shouldn’t be there, and hand you a written record of what’s paired.
What Gate Access Control Costs in Los Feliz
| Item | Typical range in Los Feliz |
|---|---|
| Remote control programming | $85 - $340 |
| Keypad entry installation | $290 - $710 |
| Phone entry system | $1,300 - $4,500 |
Can you install access control on a 1930s gate without damaging the original structure?
Yes. We surface-mount conduit in inconspicuous runs or core through the stucco pilaster from the inside, then color-match the patch. The written quote includes the masonry work, so there’s no surprise on the invoice.
Will my gate access control keep working during a Santa Ana wind event?
The electronics will, provided the gate frame itself is still square and the hinges are intact. If wind has flexed the gate, the limit switch trips and the system shuts down as designed. Call (424) 321-7416 and we’ll set it straight.
Gate Parts & Welding in Los Feliz
Gate parts and welding in Los Feliz is usually structural work on old ornamental iron that’s been flexed by wind, gravity, and decades of hillside torque. The original 1920s and 1930s gates here were often hand-forged with hinge pins seated in stucco pilasters, and when those pilasters shift, the welds crack and the gate drags. We carry replacement hinges, rollers, and rail stock, and we weld on-site so the gate doesn’t have to leave the property. Gate Parts & Welding covers the full parts catalog and welding scope.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, scrapes the driveway, or the hinge leaves have pulled loose from the stucco pilaster.
What it costs in Los Feliz
Hinge replacement in Los Feliz typically runs $180 to $480 per gate, including re-anchoring into the pilaster.
How we do it
We cut out the old hinge, weld or bolt in the new one, re-plumb the gate, and photograph the finished mount.
Custom Welding
Signs you need it
There’s a visible crack at a joint, a bent rail from a vehicle impact, or a gate leaf that flexes and pops when it opens.
What it costs in Los Feliz
Custom welding on a Los Feliz gate runs $140 to $790 depending on the length of the crack, the metal type, and whether we need to reinforce the section.
How we do it
We grind the area clean, weld the joint, grind it smooth, prime and paint the repair, and document the work with photos.
What Gate Parts & Welding Costs in Los Feliz
| Item | Typical range in Los Feliz |
|---|---|
| Hinge replacement | $180 - $480 |
| Gate roller replacement | $150 - $410 |
| Custom welding | $140 - $790 |
Can you weld a cracked 1930s gate without the repair being obvious?
We weld from the back side where possible, grind the joint flush, and color-match the paint. On ornamental work, we can usually make the repair disappear into the existing scrollwork lines.
What if the pilaster crumbles when you try to re-anchor the hinge?
We stabilize the pilaster with a steel plate or structural epoxy and re-anchor the hinge into the new base. That repair gets quoted in writing before we start, and it’s covered under the 365-Day Done Right Promise.
Brands We Service in Los Feliz
We service LiftMaster, FAAC, and BFT operators on hillside Los Feliz gates, among others, and we stock common replacement parts locally so most repairs don’t wait on a distributor. Mighty Mule and older Linear boards show up constantly on the pre-2000 gates here. See our brands for the full list of nine manufacturers.
Pricing for Gate Repair in Los Feliz, CA
| Service | Typical range in Los Feliz |
|---|---|
| Keypad entry | $290 - $710 |
| Remote control | $85 - $340 |
| Phone entry | $1,300 - $4,500 |
| Hinge replacement | $180 - $480 |
| Post replacement | $450 - $1,600 |
| Rail repair | $180 - $690 |
| Custom welding | $140 - $790 |
| Gate rollers | $150 - $410 |
On hillside Los Feliz lots, prices tend to land at the top of these ranges because of the extra time required to work on a graded driveway and re-anchor hardware into original masonry. Every price is written down and handed to you before we pick up a tool, under Haven Standard Clause 1.
Neighborhoods We Serve in Los Feliz
We work throughout Los Feliz, from the flats around Hillhurst and Vermont to the hillside streets off Griffith Park Boulevard and up into the Los Feliz Hills. Response time for most repair calls within Los Feliz is same day or next morning.
- Los Feliz Hills
- Laughlin Park
- Franklin Hills
- The flats around Hillhurst Avenue
- Streets off Griffith Park Boulevard
Service Area - Cities Near Los Feliz
Besides Los Feliz, our crews cover West Hollywood, CA, Beverly Hills, CA, Studio City, CA, and Los Angeles, CA. Dispatch and scheduling are coordinated from our Los Angeles office, and the tech on your job will have been background-checked and uniformed, with a name and photo sent before arrival.
Serving Los Feliz, CA - Our Local Coverage Area
We’re based in the Los Feliz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Los Feliz
Most gate repairs and part replacements don’t require a permit. If you’re in a historic district overlay or an HOA with architectural review, we’ll note that on the written quote and work within the neighborhood’s rules. We never start until the scope is clear.
For urgent repair calls within Los Feliz, we usually dispatch same day. A live person answers at (424) 321-7416, so you’ll know within minutes what the schedule looks like. Installation and custom welding are scheduled by appointment.
That’s a known pattern on Los Feliz hillside lots. The fix is almost always to size up to a commercial-rated operator and re-set the limit switches for the actual travel geometry, which we document with photos and a written record on the first visit.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Los Feliz Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.