Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Beverly Hills
Gate installation in Beverly Hills typically runs $4,500-$22,000 depending on gate type, automation, and whether we’re matching existing ornamental ironwork. Most new installations take 2-4 weeks from written proposal to final inspection. We coordinate directly with Beverly Hills Community Development on UL 325 compliance so your project passes municipal inspection the first time. Call (424) 321-7416 for a written, itemized quote before any work starts.
We know the difference between a flat-lot swing gate south of Sunset and a cantilever slide gate on a Coldwater Canyon grade. Our crews work in Beverly Hills weekly, and dispatch from our Los Angeles office means we can be on-site for a site survey, measurement, or emergency call without a long lead time.
Why Vance Gate Repair West Hollywood Is Beverly Hills’s Preferred Gate Installation Company
Beverly Hills properties demand a level of precision most gate companies never encounter. The gates here aren’t off-the-shelf. They’re custom ornamental steel, hand-forged iron from the 1930s, or modern cantilever systems engineered for a 14-degree driveway slope. Our technicians have installed and serviced gates on Trousdale Estates parcels, Benedict Canyon driveways, and the large-lot estates south of Wilshire. We know what these gates weigh, what their hinges do under Santa Ana load, and what the city inspector will check.
Adrian Vance founded this company in 2014 after years of commercial access-control work, and that background shapes how we approach Beverly Hills jobs. Every installation gets a written scope, a written price, and a photo record of what was installed and how it was set. Under Clause 4 of our Haven Standard, you receive photographic documentation of every adjustment, wiring connection, and limit-switch reading before we leave the property.
Our Beverly Hills customers call us because the operator that was installed five years ago by an LA City contractor now red-tags on inspection. Or because a Santa Ana gust snapped a period hinge and the gate now sags against the post. We fix it, document it, and stand behind it for 365 days under our Done Right Promise.
Our Gate Installation Services in Beverly Hills
Driveway Gate Installation
Driveway gates in Beverly Hills run the full range from simple single swing gates on the flats to 400-pound ornamental steel spans on canyon lots. We install both, but we plan for what the site actually demands: proper post footings, correct operator sizing, and entrapment protection that satisfies Beverly Hills code. A new automated driveway gate in Beverly Hills typically runs $8,000-$18,000 with automation.
Sliding Gate Installation
Sliding gates are the default choice on steep Beverly Hills driveways where a swing gate would bind or require massive grading. On Trousdale and Coldwater Canyon properties, we routinely install cantilever slide gates that carry the gate’s weight on engineered posts rather than a ground track. A cantilever slide gate installation in Beverly Hills typically runs $10,000-$22,000 depending on length and finish. The cantilever design saves the gate from rail debris and alignment drift during the rainy season, which matters on hillside properties where soil movement is constant.
Security Gate Installation
Beverly Hills security gates go beyond the gate itself. We integrate keypad entry, intercom, vehicle loop detectors, and license-plate camera systems into a single access-control setup. Our team built its skill set on commercial access-control sites, so when a Beverly Hills client wants a gate that talks to their smart home and logs every entry, we can wire it correctly the first time. Security gate installation with full access control typically runs $12,000-$25,000 in Beverly Hills.
Swing Gate Installation
For flat-lot Mediterranean and Spanish Colonial properties south of Sunset, a dual swing gate often matches the architecture better than a slide. We install swing gates with underground operators where visible arms would clash with the gate’s design. A new automated swing gate in Beverly Hills typically runs $6,500-$15,000. On period homes, we source hardware that matches the original ironwork rather than bolting on generic brackets.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Beverly Hills
We work with LiftMaster, FAAC, BFT, and Mighty Mule operators, and we never steer a Beverly Hills customer toward replacing a working motor just because we carry a different brand. Nine major automation brands are within our service capability, which means we can match the operator to the gate and the site conditions rather than forcing the site to fit a brand. For canyon-grade cantilever systems, we often specify FAAC or BFT hydraulic operators for their duty cycle under constant wind load.
Common Gate Installation Problems We See in Beverly Hills Homes
- UL 325 red-tag failures on recent installs. Beverly Hills inspectors enforce entrapment-protection compliance more strictly than surrounding cities. We’ve replaced photo-eye configurations and edge sensors on gates installed only months earlier by contractors unfamiliar with the city’s permit office. A gate without proper safety photocells fails inspection and cannot legally operate.
- Wind-damaged period hinge plates. The original wrought-iron gates on 1920s-1940s Beverly Hills estates often retain their original hand-forged hinges. Those hinges were not designed for Santa Ana gusts, and after decades of repeated loading, the metal fatigues and cracks at the hinge post. We fabricate period-matched replacements and reinforce the post rather than welding on a mismatched bracket.
- Cantilever gate drift on canyon driveways. When a slide gate is installed on a steep lot without proper lateral post engineering, the posts migrate over time and the gate begins to chatter or bind on the rollers. We see this most often on Coldwater and Benedict Canyon properties where the original installation treated a cantilever gate like a flat-lot track system.
- Operator mismatch on heavy custom gates. A typical Beverly Hills ornamental steel gate weighs far more than a suburban aluminum panel. Installing a light-duty operator on a 400-pound gate results in motor failure within months, usually under wind load. We size the operator to the actual gate weight and wind exposure, then document the calculation in your job record.
Pricing for Gate Installation in Beverly Hills, CA
A new automated driveway gate in Beverly Hills runs $7,000-$18,000 on the flats and $10,000-$22,000 on canyon lots where cantilever engineering is required. Pedestrian gate installation runs $3,000-$6,500. Security gate packages with full access control (keypad, intercom, loop detector, camera integration) start around $12,000 and can exceed $25,000 for multi-layer systems on Trousdale Estates properties.
What drives the cost: gate length and weight, steel versus wrought iron, underground versus surface operator, slope conditions, and the complexity of matching existing ornamental work. We provide a written, line-item quote before any work begins, and that price is what you pay. No change order without your signature. Call (424) 321-7416 for a free on-site measurement and written estimate.
We Also Serve Cities Near Beverly Hills
Our Gate Installation team serves Beverly Hills and the surrounding communities including West Hollywood, Studio City, Culver City, and Sherman Oaks. If you’re in one of those areas and researching gate work, the same written pricing and photo documentation apply. For the full scope of our Beverly Hills coverage, see our Gate Installation in Beverly Hills page.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Beverly Hills
Yes. Beverly Hills operates its own municipal permit office, separate from the City of LA, and any gate operator replacement or structural gate repair requires a permit through the Community Development Department. The inspection specifically checks UL 325 entrapment protection: auto-reverse function, photo-eye alignment, and edge-sensor coverage. We handle the permit application and coordinate the inspection as part of our installation scope. Call (424) 321-7416 and we’ll confirm what your project requires.
Cantilever slide gates don’t rely on a ground track or on hinges carrying the full gate weight through an arc. On Trousdale Estates driveways with 10-14 degree grades, a traditional swing gate must be built to clear the slope at the outer edge while maintaining proper hinge load at the post, which adds fabrication cost and creates ongoing alignment problems. A cantilever system carries the gate’s weight on rollers and counterbalance posts set deep into the hillside, which handles the grade and the wind load far more reliably. For most steep parcels, we recommend cantilever over swing.
Yes. We work with local metal fabricators who specialize in period-matched ornamental ironwork for Beverly Hills properties. When a gate panel or hinge from a 1920s-1940s estate is damaged, we take a section sample, match the scrollwork profile and metal thickness, and fabricate a replacement that reads as original. This is not a generic welded patch; the goal is that no one can tell the panel was replaced. We also match the patina, not just the profile.
The most common emergency is a swing gate that has slammed against its stops hard enough to snap a weld point or shear a hinge. The gate usually still opens, but it drags, cants, or binds. If left unaddressed, the damaged hinge plate begins to tear the post and the gate drops, eventually requiring a full post reset rather than a hinge replacement. We respond to these calls throughout Benedict, Coldwater, and Laurel Canyon corridors after major wind events. Call (424) 321-7416 and a live person answers, day or night.
Generally no for the heavier custom gates common in Beverly Hills. A solar operator is sized for lighter aluminum or panel gates, not a 300-400 pound ornamental steel gate that faces Santa Ana wind load. We can install solar-powered access controls (keypads, intercoms, loop detectors) that run independently of the motor circuit, but the drive motor itself should be on line voltage for reliable operation. If you want off-grid capability, we’ll size a battery backup system that works with your main power rather than trying to run the motor purely on solar.
Written by Adrian Vance, Owner at Vance Gate Repair West Hollywood, serving Beverly Hills gate installation customers since 2014.