Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Los Angeles
A new driveway gate or security gate in Los Angeles typically runs $4,800 to $14,500 installed, depending on material, length, automation, and the condition of your existing posts. Most standard single swing gates in the LA metro land between $5,000 and $8,500, including the operator and safety photocells. Sliding gates and custom steel work run higher, and steep hillside lots in the Hollywood Hills add structural work no flat-lot bid accounts for.
We serve Los Angeles directly with background-checked, uniformed technicians who carry written pricing before any tool leaves the truck. Vance Gate Repair has installed and serviced gates across Los Angeles since 2014, and Adrian Vance still runs every install review. Call us at (424) 321-7416 for a free on-site measure and a written quote you can hold us to.
Why Vance Gate Repair West Hollywood Is Los Angeles’s Preferred Gate Installation Company
Los Angeles homeowners call us after reading the three-star reviews on other companies. They want to see a price in writing, know who’s showing up, and keep a record of what was installed. That’s exactly how we work. Every Los Angeles job gets a written scope and flat price before work starts, under Haven Standard Clause 1. No verbal estimate. No surprise invoice at the end.
Adrian Vance started this company out of commercial access-control work, and that habit carried over: every visit leaves a photographed record of what was found, what was set, and what was installed. Part numbers, limit-switch readings, wiring diagrams. We file it, and you get a copy. No other residential gate company in Los Angeles works that way as standard practice.
Crews are dispatched locally from our Los Angeles office, so we reach most of Los Angeles the same day for installations, and a live person answers the phone 24/7. You won’t get a voicemail loop, and you will know the technician’s name and photo before they pull up. If a written estimate from another company has you uncertain, bring it to us. We’ll review it at no cost.
Our Gate Installation Services in Los Angeles
Driveway Gate Installation
Driveway gates are what we install most across Los Angeles, from modest Valley ranches in Sherman Oaks to gated estates in Bel Air. A powder-coated aluminum double swing gate on a flat Encino lot is a different job than a counterweighted steel gate on a sloping Silver Lake hillside. We spec the gate to the driveway, the wind exposure, and the footing condition, not to a brochure.
Every driveway gate we install gets a written price covering the panel, the posts, the operator, the safety photocells, and the concrete work. You’ll know what it costs before we pour anything.
Pedestrian Gate Installation
Pedestrian gates in Los Angeles do double duty: they secure a side yard or backyard entrance and they take the day-to-day traffic instead of the heavy driveway gate. That matters here because hillside lots in Beachwood Canyon and Mount Washington often route foot traffic along a narrow side path where a full driveway gate is physically impossible. We build and install welded steel pedestrian gates with bolt-on or weld-on hinges, and we set them into existing masonry or new footings.
Pedestrian gates on the Westside need stainless hardware from day one. We’ll explain why further down, but the short version is the marine layer.
Sliding Gate Installation
Sliding gates are the right call for Los Angeles driveways that slope upward from the street, which is most of the Hollywood Hills, Laurel Canyon, and parts of Silver Lake and Echo Park. A swing gate on a steep drive either drags or needs so much ground clearance it stops securing anything. A cantilever slide gate rides on rollers above the ground and doesn’t care about the grade.
Slide gates in Los Angeles need steel that can hold up to Santa Ana gusts. We install galvanized frames and stainless rollers as standard on coastal and canyon jobs, because a slide gate that racks in the wind will destroy its own operator.
Swing Gate Installation
Swing gates remain the most common gate in Los Angeles, especially on flat lots in the Valley, Westchester, and Culver City. They’re simpler, quieter, and cost less than a slide gate on level ground. But in Los Angeles they have a specific failure mode: Santa Ana winds push a swing gate sideways hard enough to shear hinge bolts and bend the frame, which then kills the operator.
We reinforce swing gates for the wind load they’ll actually see, not the national-average load a factory gate is built to. That means heavier hinge posts, through-bolted hinges instead of surface welds, and an operator sized for the gate’s true weight plus wind pressure.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Los Angeles
We install and service nine major gate-automation brands, so we’re not going to steer you toward a replacement motor just because your current one isn’t in our catalog. In Los Angeles we stock local parts for FAAC, LiftMaster, and BFT operators, along with Mighty Mule hardware for lighter residential gates. If you already have a Viking, Linear, or DoorKing operator, we work on those too. One company, whatever motor is on your property.
Common Gate Installation Problems We See in Los Angeles Homes
- Salt air corrosion on the Westside. The Pacific marine layer pushes moist, salty air over Venice, Mar Vista, Santa Monica, and Pacific Palisades nearly every night. Standard painted steel gate frames and zinc-plated hardware start showing surface rust within three to five years, and hinge posts can corrode through in seven. Galvanized steel and stainless fixings are not an upgrade on the coast; they are the minimum spec that survives.
- Santa Ana wind damage. Gusts up to 80 mph hit swing gates broadside. We regularly find sheared hinge pins, bent frames, and burned-out operators after a single Santa Ana event, especially in the canyons where the wind funnels. A gate that worked fine for a decade can be off its hinges overnight.
- Seismic post shifting. Even small earthquakes, the ones you barely notice, move concrete footings by fractions of an inch. Over a decade that becomes a gate that sags, rubs the ground, or stops latching. We diagnose “mystery” misalignment on Los Angeles gates all the time, and the answer is usually cumulative seismic movement, not a bad original install.
- UV degradation on operators and wood gates. Los Angeles gets more intense year-round sun than almost any major US city. Plastic operator housings turn brittle and chalky, and wood gates bleach and split. On a five-year-old Los Angeles gate, the operator housing is often the first component to fail, not the motor.
Why Gate Hardware Fails Faster on the Los Angeles Coast
The marine layer is the detail most gate companies won’t mention because it complicates a quick bid. Here’s what actually happens on the Westside: overnight, a low bank of moist ocean air settles over Venice, Mar Vista, Playa del Rey, and the rest of the coastal plain. That air is laced with chlorides, and it condenses on bare and painted steel surfaces. The corrosion cycle runs every single night, even in summer when the days are hot and dry. Paint gets a pinhole, moisture finds the steel underneath, and from there the rust spreads under the paint film. What looks like a cosmetic bubble is frequently a hinge post losing structural wall thickness.
The first things that fail on a coastal Los Angeles gate are the zinc-plated hinge bolts, then the post feet where water pools, then the welds where the frame tubes meet the pickets. Hinge posts are the structural failure that matters most, because a corroded post doesn’t just look bad. It lets the gate sag until it scrapes the driveway or stops latching. Inland in Los Angeles, a painted steel gate might last fifteen years. Three blocks from the beach, on the same hardware, you’ll see hinge play inside five.
What actually holds up here is galvanized steel tube or powder-coated aluminum, with stainless hinges, stainless brackets, and stainless fasteners throughout. We write that specification into every coastal Los Angeles installation. It costs more on the front end, generally 15 to 20 percent over painted steel, but the alternative is paying for a new hinge post and a re-hang in year six or seven. If you want a painted finish, we paint over galvanized metal. Paint is never the corrosion barrier by itself.
One Los Angeles Install That Shows What We Mean
We installed a powder-coated aluminum cantilever slide gate on a sloped Beachwood Canyon driveway where the post footings kept shifting from earthquake tremors. Our crew rebuilt the post footing with deeper concrete and upgraded the hinge post to stainless steel, then set a FAAC operator with a loop detector and safety photocells. That gate has stayed square through two Santa Ana wind events and a 4.2 tremor. The fix wasn’t a magical product. It was deeper concrete, stainless where it mattered, and an operator sized for the wind load. That’s a Los Angeles gate problem, and we solved it for a Los Angeles driveway.
Pricing for Gate Installation in Los Angeles, CA
Here are real Los Angeles market ranges, based on what we have quoted in the last 24 months across the metro:
- Pedestrian gate, steel or aluminum, installed: $1,800 to $3,600
- Single swing driveway gate with operator and photocells: $5,000 to $8,500
- Double swing driveway gate, automated: $7,500 to $12,500
- Cantilever slide gate, aluminum or galvanized steel: $6,800 to $14,500 depending on length and wind bracing
- Security gate with heavier steel and anti-climb pickets: add 25 to 40 percent over a standard gate of the same width
What moves the number in Los Angeles is the post footing, the material spec (painted steel versus galvanized versus aluminum), the operator brand, and the slope of the driveway. A hillside lot in Echo Park with a 12-foot slide gate costs more than a flat Sherman Oaks single swing. The exact price is quoted and agreed before any work starts, in writing. Call (424) 321-7416 for a free on-site measure and a written quote. Estimates are free, and you’ll see the number before you commit to anything.
We Also Serve Cities Near Los Angeles
Our Los Angeles office also schedules installations and repairs in Los Angeles and the surrounding metro, including Inglewood, Culver City, West Hollywood, and Beverly Hills. Coastal corrosion is not a Los Angeles-only problem. Mar Vista and Playa del Rey get the same marine layer, and we spec the same stainless hardware when we cross a city line. For the full scope of our service, see our Gate Installation page.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Los Angeles
The Pacific marine layer rolls in overnight and deposits chloride-laden moisture on steel and iron surfaces along the Los Angeles coast. That nightly condensation cycle accelerates corrosion dramatically, so a painted steel gate in Venice can show hinge-post rust within three to five years, while the same gate in Encino or Northridge might look fine for over a decade. The fix for coastal Los Angeles is galvanized or stainless steel substrate, not thicker paint. For an exact quote on a coastal-spec gate, call (424) 321-7416 and we’ll give you a written number.
Yes. Small tremors shift concrete post footings by fractions of an inch at a time, and after several years the cumulative movement leaves the gate sagging, rubbing, or failing to latch. The gate itself looks fine, the posts look straight, but the geometry has drifted. We fix it by re-leveling the gate, shimming or resetting hinges, and in some cases re-pouring the footing deeper so the next tremor has less work to do. This is a common Los Angeles diagnosis, not a guess.
A cantilever slide gate is usually the right answer for a steep driveway in Laurel Canyon, the Hollywood Hills, or Silver Lake. Swing gates on a slope either drag or need so much bottom clearance they stop securing the property. A slide gate rides on rollers above the grade, so the slope doesn’t matter. It does need wind bracing for Santa Ana gusts and a footing deep enough to resist seismic movement. We’ll measure the slope and the wind exposure and spec it accordingly.
Santa Ana gusts hit 60 to 80 mph and push against a swing gate like a sail. The hinge bolts shear, the frame bends, and the operator burns out trying to push a gate that’s suddenly twice as heavy in the wind. Two things help before the next event: reinforce the hinges with through-bolts instead of surface welds, and size the operator for the gate’s true weight plus a real wind load, not the factory “nominal” rating. Call (424) 321-7416 and we’ll check your gate’s wind-worthiness before the next Santa Ana, and give you a written quote for anything that needs changing.
Yes. Automatic gates in Los Angeles must have UL 325-compliant entrapment protection: photocells across the gate path, and depending on the installation, a reversing edge or other sensing device. This isn’t optional, and it’s not just building code compliance. It protects children, pets, and anyone who might be in the gate’s path. We install photocells and reversing safety edges on every automated gate, and we photograph and document the sensor positions before we leave, under Haven Standard Clause 4.
Call Vance Gate Repair West Hollywood for Gate Installation in Los Angeles
If you’re researching gate installation in Los Angeles, you’ve probably read enough vague estimates to last a while. Call (424) 321-7416 and a live person answers, 24 hours a day. We’ll schedule a free on-site measure, give you a written flat price before any work begins, and you’ll get a photographed record of everything we installed and adjusted. That’s how Adrian Vance has run this company since 2014, and that’s the standard any gate in Los Angeles deserves.
Written by Adrian Vance, Owner at Vance Gate Repair West Hollywood, serving Los Angeles since 2014.
Gate Installation in Nearby Areas