Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Inglewood, CA
Gate access control in Inglewood means something specific: keypads, intercoms, and card readers installed on gates that cycle hundreds of times on event days near SoFi Stadium and the Kia Forum. Salt-laden marine air off the Pacific eats at control boards and wiring faster here than a few miles inland, and most gates sit on post-WWII bungalow driveways that were never engineered for automation. We diagnose, repair, and install gate access control, gate parts, and welding work across Inglewood. Call (424) 321-7416 for a written price before any work begins.
Why Inglewood Homes Are Different
Inglewood’s core residential streets, Prairie Ave, Hindry Ave, and Manchester Blvd, are lined with stucco bungalows and ranch homes built mainly between the 1940s and 1960s. Nearly every automatic gate in these neighborhoods was retrofit into an existing poured-concrete driveway years after the house went up. Concrete settles, posts lean, and the gate swing was never part of the original slab design, which is why misaligned hinges and uneven gate travel show up so often here. Newer gated townhomes around the Hollywood Park mixed-use development add slide gates and HOA access-control systems that need a different skill set entirely.
Then there is the marine layer. Inglewood sits roughly five miles from the Pacific, and the consistent coastal moisture deposits salt on metal gate frames, hinges, and operator housings. Unpainted wrought iron corrodes visibly faster than in Hawthorne or Gardena, and control boards inside operator housings fail sooner when salt bridges form across terminals. Event-day traffic near the stadium compounds everything: a single residential gate operator can cycle 200-plus times in a few hours as homeowners open and close to chase off parking trespassers. That is months of normal wear compressed into one evening.
Our Main Inglewood Services
Inglewood homeowners call us most often about three things: a gate that will not open, a gate they want installed, and a motor that has stopped responding. Here is what each involves locally.
Gate Repair in Inglewood
Most repair calls in Inglewood start with a gate that has sagged on its hinges or stopped mid-swing. The post-WWII driveways and marine-layer corrosion we described above mean we regularly replace hinge brackets and realign posts that were never set deep enough for automation. We write the price, photograph what we find, and fix it the same day whenever parts are on the truck. Gate Repair in Inglewood covers the full scope.
Gate Installation in Inglewood
A new gate on a 1940s bungalow in Inglewood usually means working around a driveway slab that was poured before anyone imagined a motorized gate. We measure the slope, check post depth, and quote the job in writing before any concrete is touched. For newer townhomes near Hollywood Park, we handle HOA-spec slide gates and the access-control wiring that goes with them. Gate Installation in Inglewood walks through the process.
Gate Motor & Opener in Inglewood
Inglewood’s event-day cycling wears out motors and circuit boards on a timeline no neighboring city matches. A motor that has burned out after a sold-out SoFi night is a repair we see, not a reason to sell you a whole new gate. We service nine automation brands, including FAAC, BFT, and Linear, so the opener already on your property usually stays. Gate Motor & Opener in Inglewood lists what we fix and what it costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Inglewood
Gate access control in Inglewood is the layer that decides who gets in: keypads, remotes, phone entry, card readers, video intercoms, and the wiring and boards behind them. Homes around SoFi Stadium, Kia Forum, and the Hollywood Park townhome clusters lean on this equipment hard because event-day parking trespassers force gates open and shut far more than anywhere else in the South Bay. Salt-laden moisture from the marine layer corrodes control boards and terminal connections faster than a few miles inland, and circuits that were marginal in dry weather fail outright after a foggy stretch. The problem is rarely the gate itself; it is the electronics telling the gate what to do. That is the work documented under Gate Access Control, and it is the most common access-control repair we make on post-WWII bungalows and newer gated townhomes across Inglewood.
Keypad Entry
Signs you need it
The keypad works intermittently, ignores certain codes, or has corroded contacts after a foggy Inglewood stretch.
What it costs in Inglewood
Keypad repair or replacement typically runs $180-$340 installed, depending on whether the wiring and mounting plate are intact.
How we do it
We test voltage at the keypad, check the wire run for corrosion, replace or rewire the unit, and photograph the new settings before we leave.
Phone Entry
Signs you need it
The gate will not open from the phone app or the call-forward box fails during event-night traffic when you need it most.
What it costs in Inglewood
Phone entry repair or replacement typically runs $300-$650 installed, depending on the controller and whether the wiring is still sound.
How we do it
We verify the controller signal, replace or reprogram the unit, and leave a written record of every setting and part number installed.
What Gate Access Control Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Keypad entry repair or replacement | $180-$340 |
| Phone entry repair or replacement | $300-$650 |
| Card reader or video intercom integration | $350-$750 |
How fast can you fix my gate access control in Inglewood?
Most keypad and phone entry repairs are completed the same day the call comes in. A live person answers (424) 321-7416 around the clock, and our Inglewood crews carry common controllers on the truck.
Do you work on existing access control or only install new systems?
We repair what is already on your Inglewood property first. We service FAAC, BFT, Linear, and Viking controllers, among others, and will not steer you to a replacement when a corroded terminal or bad limit switch is the actual problem.
Gate Parts & Welding in Inglewood
Gate parts and welding in Inglewood means hinges, posts, rollers, rails, and the steel repair work that keeps a gate swinging square on a driveway slab that settled decades ago. The salt-laden marine layer that sits over Inglewood most nights accelerates rust on unpainted wrought iron and on hardware that was never galvanized, so hinge replacement and post work here happen sooner than in inland cities. Event-day cycling near SoFi and Kia Forum puts extra stress on every bracket and weld point. This is the repair work covered under Gate Parts & Welding, and it is what we do when the gate itself, not the motor, has failed.
Hinge Replacement
Signs you need it
The gate sags, scrapes the driveway, or the hinge pins have rusted and seized after years of Inglewood marine moisture.
What it costs in Inglewood
Hinge replacement typically runs $150-$400 per hinge, depending on gate weight and whether the post needs reinforcement.
How we do it
We cut or unbolt the old hinge, weld or bolt a new one in place, level the gate, and photograph the new position for your record.
Post Replacement
Signs you need it
The gate post leans, the concrete around it is cracked, or the gate will not close because the post shifted out of plumb.
What it costs in Inglewood
Post replacement typically runs $400-$900 per post, including concrete work and re-hanging the gate, in Inglewood.
How we do it
We remove the old post, set a new steel post in fresh concrete at the correct depth, and re-hang the gate square before documenting the work.
What Gate Parts & Welding Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Hinge replacement | $150-$400 per hinge |
| Post replacement | $400-$900 per post |
| Custom welding (crack repair, bracket fabrication) | $180-$500 |
Can you weld a cracked gate frame in Inglewood without replacing the whole gate?
In most cases, yes. We weld the crack, reinforce the section if needed, and repaint the repair so the gate holds for years. Call (424) 321-7416 and we will put the price in writing first.
Do you stock common gate parts in Inglewood or do you order them?
Our Inglewood trucks carry common hinges, brackets, rollers, and control boards for the brands we service. When a specialty part is needed, we quote the lead time before any work begins.
Brands We Service in Inglewood
We work on FAAC, BFT, Linear, and Viking automation, among nine major gate brands, which means we repair the motor already on your Inglewood property instead of steering you toward a replacement. Common boards and parts are stocked on our local trucks, so many repairs wrap up the same day. See our brands for the full list.
Pricing for Gate Repair in Inglewood, CA
| Service | Typical range in Inglewood |
|---|---|
| Keypad entry repair or replacement | $180-$340 |
| Phone entry repair or replacement | $300-$650 |
| Card reader or video intercom integration | $350-$750 |
| Hinge replacement | $150-$400 per hinge |
| Post replacement | $400-$900 per post |
| Custom welding | $180-$500 |
| Gate motor or opener repair | $250-$800 |
| Gate motor replacement | $600-$1,600 |
What pushes a price toward the top of these Inglewood ranges is usually salt corrosion that has spread beyond the visible part, or a post-WWII driveway slab that shifted and needs the gate re-leveled as part of the repair. Every price above is written and handed to you before any work starts, under Clause 1 of the Haven Standard, and the final invoice never exceeds the quoted number.
Neighborhoods We Serve in Inglewood
Our crews cover all of Inglewood, from the post-WWII bungalow streets north of Manchester Blvd to the newer gated townhome clusters around Hollywood Park and the SoFi Stadium corridor.
- Fairview Heights
- Morningside Park
- Downtown Inglewood
- North Inglewood
- Hollywood Park
Typical response time for a repair call anywhere in Inglewood is same-day or next-morning, depending on when you call and where the truck is at that moment.
Service Area - Cities Near Inglewood
Our crews also cover the neighboring cities, so if your property sits just outside Inglewood, you still get the same written-price standard. We serve Culver City, CA, Los Angeles, CA, Venice, CA, and Beverly Hills, CA from the same Los Angeles dispatch desk, with Inglewood calls routed to the nearest available truck.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Inglewood
Most gate repairs, hinge replacements, and access-control work do not require a permit. New gate installations that include electrical work or a new operator may require a City of Inglewood permit, and we handle that paperwork as part of the written scope. Call (424) 321-7416 and we will confirm what applies to your property.
No. Scheduling is coordinated from the Los Angeles office, but dedicated crews serve Inglewood locally, and common parts are stocked on the trucks that cover this area. Same-day repair is standard for most calls in Inglewood.
Yes. If your gate operator is acting up before a game or concert, call (424) 321-7416 and we will get a technician to your Inglewood home that day. We prioritize event-day failures because a gate stuck open on Prairie Ave or Hindry Ave invites parking trespassers.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inglewood Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.