Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Los Angeles, CA
Gate access control in Los Angeles means keypads, remotes, intercoms, and card readers wired into automated driveway gates on homes that range from 1920s Spanish Colonial properties in Hancock Park to post-war Valley ranches in Sherman Oaks. The marine layer off the Pacific keeps coastal gate hardware damp and corroded while Santa Ana winds slam gates off track and into their own operators, creating failures most other cities never see. Call (424) 321-7416 and a live person picks up, any hour.
Why Los Angeles Homes Are Different
Los Angeles has one of the highest concentrations of residential automated driveway gates in the country, driven by a deep privacy and security culture that spans modest Valley ranches to Bel Air estates. The housing stock itself forces variety: hand-forged wrought iron on older Craftsman lots, powder-coated aluminum cantilever gates on sloped Laurel Canyon driveways, and mid-century hillside properties throughout Beachwood Canyon and Silver Lake where the grade demands counterweighted designs flat-terrain cities rarely need.
Then there are the Santa Ana wind events. Sixty to eighty mile-per-hour gusts routinely slam gates off their tracks, shear hinges, bend frames, and burn out electric operators in a single night. The result is sudden, city-wide surge demand that no neighboring city experiences at the same scale. Add the Pacific marine layer depositing persistent coastal moisture on iron and steel gates across Venice, Mar Vista, and Pacific Palisades, and you get accelerated surface rust inland cities avoid entirely. Earthquake tremors compound it: even modest ones shift concrete post footings gradually, causing gates to sag, rub, or fail to latch in ways that look like installation error but trace back to cumulative seismic movement.
Our Main Los Angeles Services
Most Los Angeles homeowners contact us about one of three things: a gate that stopped working, a gate that needs replacing, or a motor that quit responding. Each has its own Los Angeles page with full pricing.
Gate Repair in Los Angeles
Repair work in Los Angeles usually starts with a gate that will not open, will not close, or makes a sound like grinding metal. We diagnose on site with a written price handed over before any tool comes out, then document every adjustment and part number in a photo log you keep. Call (424) 321-7416 and we will have a named, background-checked technician on the way. Full pricing and sub-jobs are on the Gate Repair in Los Angeles page.
Gate Installation in Los Angeles
A new gate in Los Angeles has to match an eclectic housing stock: sometimes that is a hand-forged steel driveway gate on a Spanish Colonial lot, sometimes a powder-coated aluminum cantilever gate on a hillside in Hollywood Hills. We measure, order, and install with the same written-price rule that governs every job we take. The Los Angeles installation page covers full replacement, new driveway gates, and pedestrian gates. See Gate Installation in Los Angeles for line-item pricing.
Gate Motor & Opener in Los Angeles
Los Angeles gate motors fail from wind surges, salt air, and UV degradation of plastic operator housings faster than almost anywhere in the country. We service nine automation brands including LiftMaster, FAAC, and Mighty Mule, so the fix is usually a repair, not a replacement pitch. The Los Angeles opener page lists motor replacement, arm repair, and limit-switch calibration prices. Details are on Gate Motor & Opener in Los Angeles.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Los Angeles
Gate access control in Los Angeles keeps the gate closed to strangers and open to you, your family, and whoever you approve. Homes here run everything from a simple keypad on a Valley ranch driveway to multi-tenant phone entry systems, and the marine moisture that corrodes exposed keypads on Westside properties makes component-level repair a regular job. Under Clause 4 of The Haven Standard, every visit leaves a photographed record of what was found and what was set, so no future technician has to guess. Our full service hub is Gate Access Control.
Keypad Entry
Signs you need it
The keypad works intermittently, some buttons fail to register, or the code stopped working after rain or Santa Ana winds.
What it costs in Los Angeles
Keypad replacement in Los Angeles runs $145 to $410, and wireless keypad installation typically lands between $185 and $520 depending on the gate operator.
How we do it
We test each button and wiring connection, photograph the findings, replace the keypad or repair the wiring, then set and verify every code before we leave.
Phone Entry
Signs you need it
Visitors report that the call never reaches your phone, the buzzer does not open the gate, or the voice quality has degraded to static.
What it costs in Los Angeles
Phone entry system installation in Los Angeles runs $850 to $2,400 for a complete setup, with annual cloud service fees from $120 to $360.
How we do it
We verify the telephone line or cellular connection, check the relay that triggers the gate operator, replace failed components, and test every call path before closing the housing.
What Gate Access Control Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Keypad replacement | $145 - $410 |
| Wireless keypad installation | $185 - $520 |
| Phone entry system installation | $850 - $2,400 |
Can you add a keypad to an existing gate motor?
Yes, if the operator has a receiver or an open control input. We match the keypad to the existing motor, regardless of brand, and set codes on site.
How much does access control repair cost in Los Angeles?
Most keypad and card reader repairs run between $145 and $410, and full phone entry installs start at $850. The exact figure is written and handed to you before any work starts.
Gate Parts & Welding in Los Angeles
Gate parts and welding in Los Angeles means replacing hinges that have sheared in a Santa Ana wind event, resetting posts that seismic movement has shifted out of plumb, and welding cracked wrought iron on 1920s-era properties across Los Angeles. On hillside lots in Silver Lake and Beachwood Canyon, gate rollers wear faster than the flat-terrain norm because the grade puts constant load on one side of the track. Our full parts hub is Gate Parts & Welding.
Hinge Replacement
Signs you need it
The gate drags on the ground, squeals when moved, or shows a visible gap at the top hinge where the leaf has pulled away from the post.
What it costs in Los Angeles
Hinge replacement in Los Angeles ranges from $160 for a single residential hinge to $1,950 for a full set on a heavy steel driveway gate.
How we do it
We measure the existing hinge offset, cut out and replace the worn or sheared hardware, lubricate the new assembly, and photograph the finished weld.
Post Replacement
Signs you need it
The post leans visibly, the gate latch no longer aligns with its receiver, or concrete around the post base is cracked and sinking.
What it costs in Los Angeles
Post replacement in Los Angeles runs $480 to $1,350 per post, depending on core depth and whether concrete, drilling, and red-tagging are required.
How we do it
We excavate the old footing, set the new post in concrete, brace it plumb while the pour cures, then rehang the gate and verify the latch alignment.
What Gate Parts & Welding Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Hinge replacement | $160 - $1,950 |
| Post replacement | $480 - $1,350 per post |
| Roller replacement | $180 - $460 |
Can you weld a cracked wrought iron gate on site?
Yes, for most cracks. We weld on site, grind the repair smooth, and match the finish where possible. Cast iron sections sometimes require shop work.
How much does gate welding cost in Los Angeles?
Small crack repairs start around $180 and heavier structural welding runs up to $1,950 depending on the scope. You get the written price before we strike the arc.
Brands We Service in Los Angeles
We service all nine major gate-automation brands including LiftMaster, FAAC, BFT, and Mighty Mule. We stock common control boards, remotes, and safety edges in our Los Angeles office, so most repairs happen the same day rather than waiting on a distributor. See our brands for the full list.
Pricing for Gate Repair in Los Angeles, CA
| Service | Typical range in Los Angeles |
|---|---|
| Keypad replacement | $145 - $410 |
| Wireless keypad installation | $185 - $520 |
| Phone entry system installation | $850 - $2,400 |
| Hinge replacement | $160 - $1,950 |
| Post replacement | $480 - $1,350 per post |
| Roller replacement | $180 - $460 |
| Custom welding | $180 - $1,950 |
Los Angeles pricing moves with two factors: the weight of the gate and the condition of the post footings underneath it. Hillside properties with cantilevered gates usually run higher because the hardware takes more load. Every price on this page is a written price handed over before any work starts, and it will not change unless you approve a change order in writing.
Neighborhoods We Serve in Los Angeles
Field crews dispatch from our Los Angeles office to the entire city, from the Valley floor to the Westside and the hills in between. We are usually on site within 24 hours for repair and access-control calls, and faster for wind- or seismic-related emergency failures.
- Hollywood Hills
- Sherman Oaks
- Silver Lake
- Mar Vista
- Laurel Canyon
Service Area - Cities Near Los Angeles
Beyond Los Angeles, our crews cover the neighboring cities that share the same marine moisture, seismic movement, and wind patterns. We regularly work in Inglewood, CA, Culver City, CA, West Hollywood, CA, and Beverly Hills, CA.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Los Angeles
Most Los Angeles calls get a same-day or next-day visit, and emergency wind- or seismic-related failures are prioritized for same-day dispatch when you call (424) 321-7416. A live person answers around the clock.
In many cases, a gate replacement that does not change the footprint does not trigger a permit, but sloped-hillside work, new footings, or electrical runs can. We check the local requirement for your property and handle the paperwork when it is needed.
Yes. The written price includes the trip to your Los Angeles property, labor, and the parts listed in the scope. You approve it in writing before any work begins, and no charge appears afterward that was not already on that sheet.
If your gate is off its track after last night’s wind, or the keypad just stopped responding, call (424) 321-7416. A live person answers, and you will have a written price before any tool comes out of the truck.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Los Angeles Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.