Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Burbank
Gate installation in Burbank typically runs $2,800 to $9,500 for a motorized driveway gate, depending on whether you need a sliding or swing design, the material you choose, and whether the existing posts can be reused. Most Burbank installations take two to three days from footings to final inspection. We have been doing this work in Burbank long enough to know that the city’s building department, the Santa Ana winds, and the age of the housing stock all change what a gate job actually requires. Call (424) 321-7416 for a written estimate before any work begins.
Why Vance Gate Repair West Hollywood Is Burbank’s Preferred Gate Installation Company
We are the gate contractor that puts the price in writing before a single tool comes off the truck. That is the entire premise of our business, and it is what Burbank homeowners tell us they want most: a scope, a number, and a signature. No verbal estimate that drifts upward by the time the invoice lands.
Adrian Vance built this company out of commercial access-control work that started in 2014. The habit that carried over is documentation. On every Burbank gate installation, our techs leave behind a photo log of the footings, the frame welds, the operator wiring, and the final limit-switch settings. If a future technician ever opens the panel, they will see exactly what was installed and why. Homeowners on Chandler Boulevard and in the Rancho district have told us that record alone justified the project.
Our crews serving Burbank arrive with name and photo provided before dispatch. A live person answers our phones 24 hours a day. If you call at 2 a.m. because your gate is stuck halfway and blocking the driveway, you will talk to a person, not a queue. That person can tell you what a typical Burbank gate installation entails and get you scheduled.
The 365-Day Done Right Promise applies to every gate we install. If something is not right within one full year, we return and fix it at no additional charge. That promise is part of The Haven Standard we operate under, alongside the written price and the photographic record.
Our Gate Installation Services in Burbank
Driveway Gate Installation
Driveway gates are the most common installation we handle in Burbank, especially on the ranch and bungalow properties south of Olive Avenue. Many of these homes share narrow driveway approaches with close lot lines, which changes how we set hinge posts and spec the operator. We measure clearances, grade slope, and vehicle turning radius before recommending a layout.
Pedestrian Gate Installation
Pedestrian gates alongside a driveway, or walk gates leading to a backyard, are often built from lighter tubular steel. In Burbank, the issue is usually the hardware, not the frame. The 1940s through 1960s housing stock means existing posts are frequently set in concrete that has cracked or shifted. We set new posts with stainless fixings and match them to the driveway gate so the pair opens and closes as one system.
Sliding Gate Installation
Sliding gates suit Burbank driveways with a slope or limited swing clearance. The Rancho district and the Verdugo foothills have plenty of both. A proper slide gate installation in Burbank means accounting for Santa Ana winds that can push a cantilevered leaf sideways, and rack-and-pinion hardware that holds the gate on its track. We install galvanized steel frames here rather than painted mild steel, because the wind and heat in Burbank punish both.
Swing Gate Installation
Dual swing gates are the classic Burbank driveway configuration, especially on wider lots where a single leaf would be too heavy. The wind loading across a pair of swing gates is substantial during the fall Santa Ana events that funnel through the Verdugo and San Gabriel passes. We hinge with heavy-gauge stainless pins, set posts below the frost line, and verify the operator’s force settings against UL 325 so the gates stop and reverse correctly under load.
Security Gate Installation
Burbank is home to Warner Bros., Walt Disney Studios, Cartoon Network, and dozens of production facilities. Studios run commercial-grade perimeter gates with high-cycle operators that see hundreds of open and close cycles a day. That expertise bleeds directly into our residential security gate work. Homeowners near studio corridors in Burbank have installed above-average security gate systems for privacy, and we spec operators built for that demand rather than a lightweight residential board that will burn out in under a year.
For a narrower look at the full range of work we do beyond this page, see our Gate Installation service hub.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Burbank
We work on whatever motor is already on your property, and we install new operators from the brands we trust most for Burbank conditions. LiftMaster operators pair well with the high-cycle security gates we see near studio parking entrances. FAAC and BFT are our go-to for heavier slide gates that need strong wind resistance and a thoughtful control board. Mighty Mule suits simpler residential swing gate projects where the budget is tighter. We stock the common boards, arms, and photocells for these brands locally, so parts run to Burbank jobs don’t add a week to the schedule.
Common Gate Installation Problems We See in Burbank Homes
- Powder-coat failure within a few years. Burbank summers push past 100°F regularly. A factory powder coat on steel gates will blister and peel in five to seven years of that UV exposure. Once the metal is exposed at welds and hinge points, corrosion starts. We favor galvanized steel for Burbank installations because it outlasts painted finishes.
- Santa Ana wind damage to improperly balanced gates. Winds funneling through the Verdugo and San Gabriel passes hit Burbank every fall. Swing gates that are not balanced or that lack wind-rated hinges get tossed off their posts, and slide gates bend their tracks. We see the repair calls spike each October and November.
- Undersized operators on high-cycle driveways. Homes near Warner Bros. and the production corridors often have gates that get used far more than a typical single-family driveway. A basic residential operator board burns out quickly under that load. We install motors rated for the actual cycle count.
- Post footings sunk too shallow for Burbank’s soil and wind loads. The compacted alluvial soils across Burbank’s residential flats drain slowly, and combined with wind lateral loads, shallow footings shift. We drill deeper than the residential default and let the concrete cure fully before hanging a leaf.
Pricing for Gate Installation in Burbank, CA
A new motorized driveway gate in Burbank runs $2,800 to $9,500 installed. A simple single-swing steel gate with a chain-drive operator might land around $2,800 to $4,200. A sliding gate with a galvanized frame, rack-and-pinion drive, and LiftMaster operator will typically fall between $4,500 and $7,500. Custom security gates with access control, keypads, and intercom add $1,200 to $3,000 on top, depending on the equipment. The price is quoted and agreed in writing before any work starts. That is a fixed promise, not a pitch. Call (424) 321-7416 and you will get a free written estimate within a day of our site visit.
| Installation Type | Typical Burbank Price Range |
|---|---|
| Pedestrian walk gate (steel, manual) | $750-$1,800 |
| Single swing gate, motorized | $2,800-$4,200 |
| Sliding gate, rack-and-pinion, motorized | $4,500-$7,500 |
| Custom security gate with access control | $6,000-$12,000+ |
We Also Serve Cities Near Burbank
Our crews install gates across Burbank and into North Hollywood, Studio City, Van Nuys, and West Hollywood. If you live just outside Burbank, the same written pricing, photographic documentation, and 365-Day Done Right Promise apply. The permitting process changes once you cross city lines, so ask us which jurisdiction your address falls under when you call.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Burbank
Yes, Burbank runs its own Building and Safety Division entirely separate from LADBS, so automated gate permits and UL 325 entrapment-protection inspections in Burbank follow a distinct municipal process, with its own inspection schedule and code-enforcement contacts. Technicians accustomed to pulling permits in neighboring North Hollywood or Glendale often misjudge Burbank’s timeline. We handle the permit paperwork as part of your installation. Call (424) 321-7416 and we can tell you what the current Burbank review window looks like.
Because homes near Warner Bros., Walt Disney Studios, and the production corridor often install gates that are heavier and used more frequently than a standard residential gate, while the operator installed is a basic residential board sized for a few cycles a day. High-cycle driveways burn those boards out quickly. We spec operators rated for the actual load and the actual cycle count, then photograph the limit-switch settings so the next repair, if one is ever needed, starts from a documented baseline.
Santa Ana winds funnel through the Verdugo and San Gabriel passes and hit Burbank with enough lateral force to bend slide gate tracks and throw an unbalanced swing gate off its hinge posts. Installation here has to account for sustained wind loading, not just the static weight of the gate. We use deeper footings, heavier hinge pins, and operators with wind-loading features. Last fall we installed a new slide gate for a home in the Rancho district, where Santa Ana winds had repeatedly knocked the old gate off its rack and pinion. Our crew set new post footings, welded a galvanized steel frame, and paired a LiftMaster operator with a loop detector and safety photocells, then scheduled the Burbank Building and Safety inspection.
Galvanized steel is coated with zinc that protects the metal beneath. Painted steel relies on a powder coat or paint layer that fails within five to seven years under Burbank’s 100°F-plus summer sun, and once it blisters at the welds, corrosion starts. The gate still works for a while, but the rust accelerates and the welds weaken. For Burbank installations, we recommend galvanized frames, which we can powder-coat for color if you want the look of painted steel without the maintenance.
Yes, solar gate openers work well in Burbank because the inland San Fernando Valley receives consistent year-round sun, rarely overcast for long stretches. We install solar operators for driveway gates where running a new electrical line is impractical or expensive, usually pairing a 10-watt to 30-watt panel with a battery sufficient for the gate’s cycle count. The only caveat is high-cycle studio-adjacent driveways; those often need more battery than a solar system reliably maintains, so we would recommend a wired operator.
Have a different question? Call (424) 321-7416. You will reach a live person, and the estimate is free.
Get a Written Gate Installation Estimate in Burbank Today
If you are ready for a new gate in Burbank, or if your current gate is failing, call (424) 321-7416. We will schedule a site visit, measure the opening, check the grade, recommend a design that holds up to Burbank’s wind and heat, and hand you a written price before any work begins. Under The Haven Standard, that documented estimate, the photo record of the completed installation, and the 365-Day Done Right Promise are all part of the job. No surprises. Just a gate that works.
Written by Adrian Vance, Owner at Vance Gate Repair West Hollywood.
Gate Installation in Nearby Areas