Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Reseda, CA
Gate access control in Reseda means keypads, card readers, phone entry and video intercoms wired into automatic gates on 1950s-1970s ranch tracts. Most of the hardware we touch here was installed during the 1994-1997 post-earthquake rebuild and is now failing in clusters. Call (424) 321-7416 and you’ll reach a live person who can schedule a technician to your Reseda driveway, usually the same day for access control failures.
Why Reseda Homes Are Different
The 1994 Northridge earthquake epicenter sat near Reseda Blvd and Arminta St, and the concrete block perimeter walls and gate posts across this neighborhood absorbed the worst of it. Insurance money rebuilt thousands of driveway gates between 1994 and 1997, and that hardware is now 27-30 years old. We see the same failure patterns repeat block to block: corroded hinges on swing gates that survived the rebuild, hairline-cracked block pillars from two decades of settling, and mid-1990s Linear or Ramset slide operators whose circuit boards are giving out.
Reseda’s flat valley lots have another problem: soil movement. Decade after decade of dry summers and wet winters shifts gate posts just enough to throw frames out of square. A gate operator installed on a post that’s tilted 3 degrees will chew through limit switches and gears, and that’s a repair we make weekly in Reseda. Add summer temperatures that pass 105°F, and tubular steel gates expand enough to bind against posts and ground-level concrete from mid-July through September.
Our Main Reseda Services
These are the two jobs Reseda homeowners call us about most often, each with its own detailed page.
Gate Repair in Reseda
Fallen gates, seized hinges, broken welds, and operators that run but won’t move the gate. Reseda’s post-quake cohort of hardware means we often find the same original parts failing at the same age, which makes diagnosis faster. We quote a flat price in writing before any work starts, then leave a photo record of every adjustment. Learn more on our Gate Repair in Reseda page.
Gate Installation in Reseda
New driveway gates on existing block pillars or as full frame-and-gate installations. In Reseda, we check post plumb before quoting, because decades of valley soil movement mean many existing pillars are too far out of square to hang a new gate without shimming or re-setting. See the full scope on our Gate Installation in Reseda page.
Gate Motor & Opener in Reseda
Operator replacement and repair across nine automation brands, including the mid-1990s Linear and Ramset units still common in Reseda’s rebuild-era driveways. Extreme summer heat ages capacitors and control boards faster than manufacturer ratings assume, so we test and document every setting we change. Details on our Gate Motor & Opener in Reseda page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Reseda
Gate access control in Reseda covers the electronics that decide who gets in: keypads, phone entry, card readers, remote controls and video intercoms wired to your driveway gate. The housing stock here matters, because most Reseda gates sit on 1950s-1970s CMU block walls where running new low-voltage wire means surface-mounting conduit or chasing mortar joints. The extreme summer heat in the inland valley also kills access control components faster than the manufacturer’s rated lifespan, especially circuit boards and keypad membranes that sit in direct sun on west-facing block walls.
When a keypad goes dark or a phone entry system stops triggering the gate, we trace the full path from the wall station to the operator board, replace what failed, and photograph the final wiring state. That documentation is part of every job, and it lives in your file so no future technician has to re-trace the circuit. This is the same record-keeping discipline behind commercial access control work Adrian Vance has done since 2014, applied to a Reseda driveway gate. Our full Gate Access Control service details apply to every Reseda job.
Keypad Entry
Signs you need it
The keypad beeps but won’t trigger the gate, or digits stick and you can’t enter the code.
What it costs in Reseda
A keypad replacement typically runs $150-$400 installed, depending on whether we can reuse the existing low-voltage wire or need to run new conduit on your block wall.
How we do it
We test the keypad at the wall, check continuity back to the operator board, replace the unit or the wire run, then reprogram codes and photograph the finished wiring.
Phone Entry
Signs you need it
Callers get a busy tone, the gate won’t buzz open, or the unit dials a disconnected number.
What it costs in Reseda
Phone entry system repair runs $200-$550 depending on whether the fault is in the relay, the phone line interface, or the unit’s power supply.
How we do it
We verify dial tone at the unit, test the relay that triggers the gate, replace the failed board or power supply, and document the fix with photos.
Video Intercom
Signs you need it
The monitor shows no picture, or video comes through but the open button does nothing.
What it costs in Reseda
Video intercom repair typically runs $250-$600, depending on whether the camera, the monitor, or the wiring between them failed.
How we do it
We isolate whether the failure is camera, monitor, or cable, replace the dead component, and leave you a written record of the part number installed.
What Gate Access Control Costs in Reseda
| Item | Typical range in Reseda |
|---|---|
| Keypad replacement | $150-$400 |
| Phone entry repair | $200-$550 |
| Video intercom repair | $250-$600 |
Is access control repair in Reseda urgent?
Yes, when it controls the only entrance to your property. A dead keypad or failed phone entry means no one gets in and no automated gate opens. Call (424) 321-7416 and a technician can be at your Reseda driveway same day in most cases.
Can you install access control on my existing Reseda gate?
Yes, we retrofit keypads, phone entry, card readers and video intercoms onto existing gates from every era, including the mid-1990s rebuild hardware still common in Reseda. Estimates are free and in writing.
Gate Parts & Welding in Reseda
Gate parts and welding in Reseda means fixing the steel and concrete bones of a driveway gate: hinges, posts, rails and welds that have fatigued after 30 summers of 105°F heat and 30 winters of valley soil movement. The 1994 earthquake rebuild generation of gates is now old enough that hinges are snapping and posts are tilting in a very predictable pattern. When that happens, we cut out the failed section, weld in new steel, and re-set the post plumb before any operator work resumes.
Welding on a Reseda driveway is usually straightforward: we bring a mobile welder, a grinder, and the right stock metal to handle everything from a cracked hinge plate to a snapped slide rail. Every job gets quoted flat before we strike an arc, and every finished weld gets photographed before and after. This is the work that makes operators function again, and our Gate Parts & Welding service page covers the full list of what we can do.
Hinge Replacement
Signs you need it
The gate sags, drags on the ground, or the hinge pin is visibly worn or snapped.
What it costs in Reseda
Hinge replacement usually runs $125-$350 per hinge, depending on gate weight and whether we need to weld new plates to the post.
How we do it
We support the gate, cut off the old hinge, weld on a new heavy-duty hinge, and re-align the gate so it swings level.
Post Replacement
Signs you need it
The gate post is visibly leaning, cracked at the base, or the gate binds against the frame no matter how the hinges are adjusted.
What it costs in Reseda
Post replacement typically runs $400-$900 per post, including pulling the old post, setting a new one in concrete, and re-hanging the gate.
How we do it
We saw the old post at the base, dig out the footing, set a new plumb post in fresh concrete, and re-mount the gate and operator.
Rail Repair
Signs you need it
The slide gate jumps the track, scrapes, or the rail itself is bent or worn through by the rollers.
What it costs in Reseda
Rail repair runs $180-$450, depending on rail length and whether we weld patch steel or replace the full run.
How we do it
We cut out the damaged section or replace the whole rail, weld it level, and re-set the roller heights so the gate runs smooth.
Custom Welding
Signs you need it
A crack runs through any gate member, or a bracket, tab, or attachment point has torn off.
What it costs in Reseda
Custom welding typically runs $150-$400 per repair point, depending on material thickness and access.
How we do it
We grind the crack back to clean steel, weld it with the correct rod and amperage, and photograph the finished joint.
What Gate Parts & Welding Costs in Reseda
| Item | Typical range in Reseda |
|---|---|
| Hinge replacement | $125-$350 per hinge |
| Post replacement | $400-$900 per post |
| Rail repair | $180-$450 |
Can you weld my gate without removing it from the driveway?
Yes, we handle most welding on-site with a mobile rig setup designed for driveway work. If the gate needs to come off its hinges for a bench repair, we quote that separately before any work starts.
How long does a post replacement take in Reseda?
Most concrete footings cure enough to re-hang a gate the next day, and we schedule the re-hang around that. The full scope and timeline are in the written estimate before we dig.
Brands We Service in Reseda
We service LiftMaster, Mighty Mule, FAAC and BFT operators across Reseda, plus the older Linear and Ramset units that dominated the post-quake rebuild era. Common control boards and limit switches are stocked in our Los Angeles parts cache, so many Reseda repairs happen the same visit without a parts-order delay. See our brands for the full nine-brand list.
Pricing for Gate Repair in Reseda, CA
| Service | Typical range in Reseda |
|---|---|
| Keypad replacement | $150-$400 |
| Phone entry repair | $200-$550 |
| Video intercom repair | $250-$600 |
| Hinge replacement | $125-$350 per hinge |
| Post replacement | $400-$900 per post |
| Rail repair | $180-$450 |
| Custom welding | $150-$400 per point |
| Gate operator repair | $200-$600 |
| Slide gate motor replacement | $800-$1,800 |
| Swing gate motor replacement | $700-$1,600 |
In Reseda, the two things that push price up are post alignment and operator age. A gate post tilted by decades of soil movement has to be plumbed before a new operator goes in, and a mid-1990s rebuild-era operator often needs its mounting plate re-fabricated to fit a modern replacement. Whatever the final number, you get it in writing before any work begins.
Neighborhoods We Serve in Reseda
We cover every corner of Reseda, from the blocks east of Reseda Blvd to the tracts west toward Tampa Ave, and from Vanowen Street south to Victory Blvd. Our technicians routinely work driveways across the full span of the community.
- Reseda Ranch
- Central Reseda
- West Reseda / Reseda West
- North Reseda / Tarzana border
- South Reseda / Encino border
Most Reseda calls get a technician on-site the same day, especially for access control failures and gates that won’t close.
Service Area - Cities Near Reseda
Beyond Reseda, we serve the surrounding San Fernando Valley communities with the same written-price, documented-work standard. Our crews regularly work in Tarzana, CA to the south, Encino, CA just below that, Sherman Oaks, CA to the southeast, and Van Nuys, CA to the east. Scheduling is coordinated from the Los Angeles office, and technicians dispatch directly to your driveway.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Reseda
Access control failures and gates that won’t close are same-day priority calls. A live person answers (424) 321-7416 24 hours a day, confirms your Reseda location, and dispatches the nearest available technician. Most repair visits begin within a few hours of your call.
Most repairs and parts replacements don’t require a permit. Full new installations or post replacement that alters a property line or driveway approach may fall under Los Angeles city building code, and we’ll flag that during the written estimate so you know before any work starts.
Over the phone we can give the typical range for your gate problem, and the exact flat price comes in writing once a technician sees the site. Every job gets a written quote before work starts, and if another company wrote the first estimate, bring it and we’ll review it at no cost.
Call (424) 321-7416 for a free estimate on any gate repair, access control, or welding job in Reseda.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Reseda Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.