Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Burbank, CA
Gate access control in Burbank usually means retrofitting a 1970s wrought-iron driveway gate with a keypad, card reader, or phone-entry system that can handle the San Fernando Valley’s 100°F summers without failing. We regularly work on post-WWII ranch homes south of Olive Avenue where original tubular steel gates have corroded at the welds, alongside larger Rancho district properties with 1990s automated slide gates now reaching end-of-life on their operators. Call (424) 321-7416 and we’ll give you a written price before any work starts.
Why Burbank Homes Are Different
Burbank’s inland location changes how gates fail. Summer temperatures above 100°F accelerate UV degradation on powder-coat finishes, leaving bare steel that rusts at hinge points within a few seasons. Wood gate components crack and warp far faster here than in coastal LA communities. Then come the Santa Ana winds in fall: funneled through the Verdugo and San Gabriel passes, they routinely knock improperly balanced or rail-damaged gates off track. We see a spike in track and roller failures every October and November.
The housing stock tells its own story. South of Olive Avenue, dense 1940s-1960s ranch and bungalow homes had decorative wrought iron and tubular steel driveway gates retrofitted in the 1970s and 1980s. Those welds are now 40 to 50 years old, and we replace more corroded hinge barrels and cracked post welds in this corridor than anywhere else in the city. Up in the Rancho district and Verdugo foothills, larger parcels carry heavier custom automated slide or swing gates from the 1990s security boom, and those operators are hitting end-of-life together. One more Burbank-specific reality: the city runs its own Building and Safety Division entirely separate from LADBS, so automated gate permits and UL 325 entrapment-protection inspections follow a distinct municipal process. Technicians who pull permits in North Hollywood or Glendale get tripped up by Burbank’s independent inspection schedule. We plan for it.
Our Main Burbank Services
Most Burbank homeowners call us for one of two reasons: a gate that stopped moving, or a gate they want automated. These are the three pages Burbank residents use most.
Gate Repair in Burbank
A gate off its track in Burbank is usually a Santa Ana wind casualty or a failed roller on a 40-year-old tubular steel frame. Gate Repair in Burbank covers track realignment, hinge and roller replacement, weld repair, and panel straightening. We photograph every adjustment and leave you a written record of what was found, what was set, and what was replaced before we leave the driveway.
Gate Installation in Burbank
New gate work in Burbank means pulling permits through the city’s own Building and Safety Division, not LADBS, and matching the gate to a house built in 1952 or a hillside parcel with a 1990s security gate. Gate Installation in Burbank covers custom steel, aluminum, and wood gates, swing and slide configurations, and full operator integration. You get a written scope and a written price before fabrication begins.
Gate Motor & Opener in Burbank
Burbank’s heat and Santa Ana cycles shorten operator life, especially on older Mighty Mule and LiftMaster units that were never sized for high-cycle daily use. Gate Motor & Opener in Burbank covers replacement motors, control boards, photo-eyes, and limit-switch calibration on all nine major automation brands. We service what’s already on the property rather than steering you toward a replacement you don’t need.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Burbank
Gate access control in Burbank means adding a keypad, card reader, phone-entry system, or video intercom to a driveway gate so you decide who gets in without walking out to the curb. In Burbank’s studio-adjacent neighborhoods, homeowners have installed above-average security gate systems for privacy, and many of those systems now need upgraded access hardware that can handle daily use. We bring the same wiring-diagram discipline Adrian Vance developed on commercial access-control sites starting in 2014 to every residential keypad and reader we install in Burbank. Here’s what that looks like: Gate Access Control covers the full scope, from a single keypad retrofit to a complete phone-entry system.
Keypad Entry
Signs you need it
You’re handing out gate remotes to every family member, cleaner, or delivery person because there’s no other way in.
What it costs in Burbank
Keypad entry installation in Burbank typically runs $450-$1,200 depending on whether we’re adding a standalone pedestal or tying the keypad into an existing operator’s control board.
How we do it
We mount the keypad, run conduit-rated low-voltage wire to the operator, program user codes, and photograph the wiring terminations before we leave.
Phone Entry
Signs you need it
You want visitors to call your phone from the gate and you want the ability to open it remotely.
What it costs in Burbank
Phone entry systems in Burbank typically run $800-$1,800 depending on whether the unit is cellular or landline-based and whether we’re adding a second keypad at the house.
How we do it
We install the entry panel at the gate, program forwarding numbers, test the relay to the operator, and leave a written programming record with your access codes redacted but your settings documented.
What Gate Access Control Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Keypad entry (single gate) | $450-$1,200 |
| Phone entry system | $800-$1,800 |
| Card reader retrofit | $400-$1,100 |
Does a Burbank access-control gate need a separate permit?
Yes, if the access-control work triggers a gate operator change or new low-voltage run that Burbank’s Building and Safety Division classifies as an alteration. We check the permit requirement for every Burbank job before quoting, and the written price reflects any permit fees and inspection scheduling.
Can you add a keypad to my existing Burbank gate operator?
In most cases, yes. LiftMaster, FAAC, BFT, and Linear operators in Burbank homes all have auxiliary input terminals for keypad and reader integration. We confirm compatibility during the estimate, not after we’ve started, so the written price holds. Call (424) 321-7416 for a free estimate.
Gate Parts & Welding in Burbank
Gate parts and welding in Burbank usually means replacing hinge barrels and post welds on 1970s-1980s wrought iron gates that have been rusting at the joints since the first Santa Ana season. South of Olive Avenue, we replace more corroded hinge points and cracked tubular steel welds than anywhere else in the city. On larger Rancho district and Verdugo foothills properties, the work shifts to rail repair and roller replacement on heavier slide gates. Gate Parts & Welding covers everything from a single hinge barrel to a full post replacement with concrete work.
Hinge Replacement
Signs you need it
The gate sags at the latch side, scrapes the driveway, or you can see daylight through the hinge barrel where the pin has wallowed out the bore.
What it costs in Burbank
Hinge replacement in Burbank typically runs $180-$420 per hinge depending on whether we’re replacing just the barrel or the entire weld-on hinge assembly.
How we do it
We cut the old hinge free, weld in a new assembly sized to the gate’s weight, and photograph the finished weld before and after paint.
Rail Repair
Signs you need it
The gate shudders when it moves, the rollers skip, or you can see a visible kink or corrosion line along the bottom rail where the rollers ride.
What it costs in Burbank
Rail repair in Burbank typically runs $300-$900 depending on the length of damaged rail, whether we’re splicing in new steel, and whether the gate needs to be unloaded from its track.
How we do it
We cut out the rusted or bent section, weld in a replacement rail section of the same gauge, grind the weld flush, and re-level the rollers to the new rail.
What Gate Parts & Welding Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Hinge replacement | $180-$420 per hinge |
| Rail repair | $300-$900 |
| Post replacement (steel, concrete-set) | $500-$1,200 |
Can you weld a cracked Burbank gate without replacing the whole panel?
In most cases, yes. We assess the crack, weld it with the gate supported to relieve stress, then add a reinforcing gusset if the section carries load. You get a written record of what was welded and a photo of the finished repair before we leave. Call (424) 321-7416 for a free estimate.
My Burbank gate post is rusted at the base. Does it need concrete work?
Usually, yes. A rusted post base means the steel has lost section where it enters the concrete. We cut the post at the rust line, weld in a new section with a base plate, and re-set it in fresh concrete with proper drainage so water can’t pool. The written price includes the concrete work.
Brands We Service in Burbank
We service all nine major gate-automation brands on Burbank properties, including LiftMaster, Mighty Mule, FAAC, and BFT operators. We stock common control boards, photo-eyes, limit switches, and keypad parts for these brands locally, so most Burbank repairs don’t wait on a parts order. See our brands for the full list.
Pricing for Gate Repair in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Keypad entry installation | $450-$1,200 |
| Phone entry system | $800-$1,800 |
| Card reader retrofit | $400-$1,100 |
| Hinge replacement | $180-$420 per hinge |
| Rail repair | $300-$900 |
| Post replacement (steel, concrete-set) | $500-$1,200 |
| Custom welding (per hour) | $95-$160 |
| Gate roller replacement | $120-$300 per roller |
What pushes a Burbank gate repair higher is usually rust damage that’s worse than it looked from the surface, or a gate that needs to be unloaded from its track before welding can begin. Whatever the job, you get a written price before we pick up a tool, and that price doesn’t change unless you approve a change in writing first.
Neighborhoods We Serve in Burbank
We serve every residential neighborhood in Burbank, from the dense post-war flats south of Olive Avenue to the larger parcels in the Rancho district and the Verdugo foothills. Response time for most Burbank gate repairs is same-day or next-day depending on the season and the job.
- Rancho district
- Verdugo foothills
- South of Olive Avenue
- Magnolia Park
- Burbank Hills
Service Area - Cities Near Burbank
We handle gate repair and access control work in Burbank and the surrounding Los Angeles communities. If you’re in North Hollywood, CA, Studio City, CA, Van Nuys, CA, or West Hollywood, CA, we dispatch local crews to your gate with the same written-price-before-work standard.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Burbank
For a gate stuck open or one that won’t close, we dispatch same-day in Burbank in most cases. A live person answers the phone 24/7, so you’re never routed to voicemail. Call (424) 321-7416 and we’ll give you a written price before any work starts.
Burbank’s Building and Safety Division operates independently from LADBS, so automated gate permits and UL 325 entrapment-protection inspections follow a separate municipal process. We check the permit requirement for every Burbank job before quoting, and the written price reflects any permit fees and inspection scheduling.
Yes. Many Burbank neighborhoods, especially in the hills and newer developments, have HOA design standards for gate style, height, and finish. We coordinate with the HOA where needed, and the written scope includes any design-review documentation the association requires.
Call (424) 321-7416 for a free estimate on any gate repair, access control, or welding job in Burbank. You’ll get a written price before work starts, a photographed record when we leave, and the 365-Day Done Right Promise covering every completed job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.